Product center

KMT-FEP Heat Shrink Tubing

High temperature welding is the best choice, high temperature resistance, no crystal point

KMT-LWA Peelable Fusion Heat Shrink Tubing

The sulfur of the conduit is fused and can be removed easily

KMT-LWA-MK Heat Shrink Marker Tubing

Identification of conduit and harness

KMT-LWA-HR PE Heat Shrink Tubing

KMT-LWA-HR is designed for applications requiring a shrinkage ratio of 4:1 or greater. Provides excellent electrical insulation properties and resistance to abrasion and harmful solvents. Also used for stress relief, marking and process aids.

Precision Extruded Sleeves

Precision Extruded Sleeves

KMT-LWA-R LDPE Heat Shrink Tubing

KMT-LWA-R is a cross-linked low density polyethylene (LDPE) heat shrink sleeve that offers excellent flexibility, making it an excellent choice for strain relief applications. Its homogeneous structure (even distribution of properties) gives it excellent consistency and high performance, and KMT-LWA-R is essentially free of defects, pinholes, lines or impurities.

KMT-PTFE Heat Shrink Tubing

PTFE heat shrink tubing helps to extend product life by providing a protective layer that can withstand heat, shock, corrosion, moisture and other extreme conditions. Our PTFE and FEP tubing is water resistant, chemically inert and can be produced in a wide range of custom sizes and a range of shrinkage rates, making it the product of choice for medical and non-medical industries. PTFE heat shrink tubing is available in 2:1 and 4:1 shrinkage ratios (for use on mandrels or components with axial reducers). These heat-shrinkable tubes have an upper temperature limit of 260 °C and a lower limit of -200 °C, making them one of the widest operating temperatures available today.PTFE heat shrink tubing has excellent dielectric strength and is ideal for the encapsulation of wires and electrical components.

KMT-PTFE ZEBRA SPIRAL Heat Shrink Tubing

KMT-PVDF-SR Semi-rigid PVDF Heat Shrink Tubing

KMT-PVDF-SR is a cross-linked polyvinylidene fluoride (PVDF) heat shrink tubing with excellent chemical and abrasion resistance, high dielectric strength and excellent tensile strength. Its uniform structure (even distribution of properties) gives it consistency and high performance, and KMT-PVDF-SR heat-shrinkable tubing is essentially free of pinholes, lines, cracks or impurities, etc. KMT-PVDF-SR is a semi-rigid material with a transparent colour and provides excellent wear protection for rigid laparoscopes and internal instruments.

KMT-PVDF-VF Flexible PVDF Heat Shrink Tubing

polyvinylidene fluoride (PVDF) heat-shrinkable tubing. PVDF has excellent chemical and abrasion resistance, high dielectric strength and excellent tensile strength. Its homogeneous structure (uniform distribution of properties) gives it good consistency and high performance. Our KMT-PVDF-VF is essentially free of defects, pinholes, lines, cracks or impurities. The KMT-PVDF-VF is flexible and more flexible than the YMT-1000 PVDF heat shrinkable cannula. Provides abrasion protection for surgical and internal instruments.

KMT-LWA-R LDPE Heat Shrink Tubing

KMT-LWA-R is a cross-linked low density polyethylene (LDPE) heat shrink sleeve that offers excellent flexibility, making it an excellent choice for strain relief applications. Its homogeneous structure (even distribution of properties) gives it excellent consistency and high performance, and KMT-LWA-R is essentially free of defects, pinholes, lines or impurities.

KMT-PTFE ZEBRA SPIRAL Heat Shrink Tubing

KMT-PTFE Zebra (spiral) heat shrink cannulae are used to shrink guide wires for flexible endoscopic devices. The unique colour pattern indicates the movement of the wire to assist the surgeon in the procedure. Due to the low friction properties of PTFE, the Zebra (spiral) heat shrink has exceptional colouring capabilities. We offer shrinkage ratios of up to 4:1.

KMT-LWA-HP HDPE Heat Shrink Tubing

KMT-LWA-HP is a cross-linked, high density polyethylene (HDPE) heat shrink tubing made from tough, modified polyolefins irradiated and cross-linked with a thin-walled structure. It also provides excellent abrasion protection and high performance insulation. Its homogeneous structure (uniform distribution of properties) results in good consistency and high performance, and the product is essentially free from defects, pinholes, lines, cracks or impurities. The KMT-LWA-HP is semi-rigid and highly mechanically tough with high insulating properties, making our product a prime choice for electrosurgical equipment applications. It is particularly suitable for medical applications where lubricity, flexibility and excellent electrical insulation properties are required. KMT-LWA-HP offers a cost-effective alternative to FEP while maintaining performance after gamma sterilisation. Electrical insulation, mechanical protection, stress relief, colour coding and identification can be provided for many medical components and devices.

KMT-LWA Peelable Fusion Heat Shrink Tubing

KMT-LWA Peelable Fusion Heat Shrink Tubing